Rain-Sensing Wipers Grand Rapids MI

The term "rain-sensing wipers" is commonly used for a system designed to clear the windshield of rain, snow, and debris without driver intervention. The system is programmed to automatically activate and alter the speed and rate of the wiper blades to keep outward visibility unobstructed at all times. A rain-sensing wiper system does not clean the windshield any better than a manual system; it simply monitors outward visibility and automatically activates the wipers.

AutoZone
(616) 742-9965
1112 Fuller Ave NE
E Grand Rapids, MI
 
AutoZone
(616) 447-0323
3434 Plainfield Avenue N.E.
Grand Rapids, MI
 
AutoZone
(616) 530-4609
2001 28th St SW
Wyoming, MI
 
AutoZone
(616) 827-9067
6729 Division Ave SE
Grand Rapids/Cutlerville, MI
 
AutoZone
(616) 464-3503
2850 28th St SE
Kentwood, MI
 
AutoZone
(616) 241-9332
1210 S. Division Ave
Grand Rapids, MI
 
Maaco Auto Body Shop and Collision Center
(616) 534-0305
2755 28Th Street S. W.
Wyoming, MI
Hours
Mon-Fri :8AM - 5:30PM, Mondays Until 7pm
Sat:Call for hours of operation
Sun:Closed

AutoZone
(616) 246-7006
2920 Eastern Ave
Grand Rapids, MI
 
AutoZone
(616) 742-1100
619 Leonard St NW
Grand Rapids, MI
 
AutoZone
(616) 785-5183
3655 NW Alpine Ave
Comstock Park, MI
 

Rain-Sensing Wipers

Provided by:

Click here for more content from JDPower.com

Windshield wipers, which have been standard equipment on most vehicles since 1916, were developed to improve visibility during inclement weather. For nearly 100 years, drivers operated the wipers with manual controls mounted on the dashboard. Today, technology has made possible motorized windshield wipers that automatically recognize a developing visibility problem and clear the glass

before the driver can react to the problem.

The term "rain-sensing wipers" is commonly used for a system designed to clear the windshield of rain, snow, and debris without driver intervention. The system is programmed to automatically activate and alter the speed and rate of the wiper blades to keep outward visibility unobstructed at all times. A rain-sensing wiper system does not clean the windshield any better than a manual system; it simply monitors outward visibility and automatically activates the wipers.

How do they work?
The technology behind rain-sensing wipers is not complicated. A small area of the front windshield glass (usually located on the outside of the vehicle, opposite the rear-view mirror) is monitored by an optical sensor. The sensor is designed to project harmless infrared light at the windshield at an angle and then read the amount of light that is reflected back. A clean windshield will reflect nearly all of the light back, while a wet or dirty windshield will cause the light to scatter. The optical sensor can determine the necessary frequency and speed of the windshield wipers by monitoring the amount of light reflected back into the sensor....

Click here to read the rest of the article at JDPower.com