Brick Rowlock Sills and Coping Holland MI

Brick rowlock sills or copings can be aesthetically pleasing and are appropriate in many applications in Holland. However, there are several things to consider before using them. Because brick rowlock sills and copings have many joints, considerable moisture can enter the wall.

Grammatico Masonry
(734) 769-4101
435 Evergreen Dr
Ann Arbor, MI
 
Master Chimney
(810) 424-4002
601 S Saginaw St
Flint, MI
 
Stone Doctor
(248) 698-3161
White Lake Twp
Sterling Heights, MI
 
Contractor'S Wall Repair Inc
(517) 882-8483
5218 South Waverly Road
Lansing, MI
 
B & B Masonry
(810) 743-5634
3901 Circle Dr
Flint, MI
 
Bashore Marco Masonry Inc
(517) 393-9704
6237 Aurelius Rd
Lansing, MI
 
Rose Tile & Masonry
(734) 662-8004
1917 Dunmore Rd
Ann Arbor, MI
 
Sivosky Steve
(810) 732-4490
6131 Mapleridge Dr
Flint, MI
 
DAVE BUHLER MASONRY INC
(810) 639-1887
PO BOX 363
FLUSHING, MI
Services
CHIMNEY AND MASONRY REPAIR

Giannola Masonry Co
(586) 792-2070
35086 Cordelia St
Clinton Township, MI
 

Brick Rowlock Sills and Coping

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 1998

Are brick rowlock sills or copings ever appropriate?

Brick rowlock sills or copings can be aesthetically pleasing and are appropriate in many applications. However, there are several things to consider before using them. Because brick rowlock sills and copings have many joints, considerable moisture can enter the wall. Water penetration along the top of masonry walls can contribute to efflorescence in warmer climates and both efflorescence and freeze-thaw damage in colder climates. Therefore, when using these elements in a wall system, flashing should be placed underneath the rowlock masonry. Note that the flashing in these cases will create a bond break that will separate the coping or sill from the remainder of the wall. For this reason, dowels or anchors must be used to attach a rowlock coping to the masonry below. At sills, an alternative approach is to tie the masonry to the backup wall. The dowels or anchors must be adequately sealed around the flashing to prevent leakage. In freeze-thaw environments, rowlock copings and sills often are not durable. Snow and ice can collect at the top surface of these elements. During the day, this snow and ice will melt when exposed to direct sunlight, even in below-freezing temperatures. At night, this water will freeze within the masonry. Over time, freeze-thaw cycling will break up brick copings and sills by causing deterioration of the mortar and brick.Avoiding brick sills and copings in freeze-thaw environments is typically recommended. In these climates, rowlock sills and copings will require more maintenance than the remainder of the wall. When brick sills or copings are used, they should be sloped with a 3:12 slope or greater to drain water or snow as quickly as possible.

Click here to read full article from Masonry Construction