Anchors & Reinforcement Holland MI

The Keil mechanical anchor is made from stainless steel and comes in eight lengths, from 4 mm to 15 mm. This undercut anchor is used for natural and artificial stone, porcelain, glass ceramic, and high-pressure laminate. The product is easy to install and safe, with a high pull out rating in various materials.

Grammatico Masonry
(734) 769-4101
435 Evergreen Dr
Ann Arbor, MI
 
Stone Doctor
(248) 698-3161
White Lake Twp
Sterling Heights, MI
 
Omega Construction & General Repair
(734) 665-8154
4042 Ann Arbor Saline Rd
Ann Arbor, MI
 
City Basement
(616) 249-0899
1260 44th St Se
Grand Rapids, MI
 
Hoffman Plastering
(734) 663-5262
872 Rose Dr
Ann Arbor, MI
 
Milhiem Masonry
(616) 485-3740
1102 4th St Nw
Grand Rapids, MI
 
Contractor'S Wall Repair Inc
(517) 882-8483
5218 South Waverly Road
Lansing, MI
 
Walt'S Construction Co
(810) 787-6852
3906 Milbourne Ave
Flint, MI
 
Tip-Top Chimney Sweep
(810) 234-5000
3714 W Court St
Flint, MI
 
Rose Tile & Masonry
(734) 662-8004
1917 Dunmore Rd
Ann Arbor, MI
 

Anchors & Reinforcement

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: November 1, 2007

By MASONRY CONSTRUCTION Staff

Mechanical model comes in eight lengths

The Keil mechanical anchor is made from stainless steel and comes in eight lengths, from 4 mm to 15 mm. This undercut anchor is used for natural and artificial stone, porcelain, glass ceramic, and high-pressure laminate. The product is easy to install and safe, with a high pull out rating in various materials.

  • Tile Eze USA Inc., 800-476-3737, www.tile-eze.com
Helical ground anchors control the situation

Brace Badger helical ground anchors are designed for the tilt-up and precast wall industries. The anchors are drilled into the ground in a fraction of the time it takes to set up a concrete deadman. They provide complete control of where to place the anchors depending on the wall height, offer immediate load capacity, and are easily removed.

  • Meadow Burke Products, 877-518-7665, www.meadowburke.com
System strengthens masonry arch bridges

The Archtec system is a complete diagnostic design and installation service for strengthening masonry arch bridges. The process involves numerical modeling of the bridge and simulation of the loading regime to specify a reinforcing system. A computer model determines the bridge's load carrying capacity in its current state.

  • Cintec America Inc., 800-363-6066, www.cintec.com

Click here to read full article from Masonry Construction